Difference between revisions of "Buoyancy pressures and hydrocarbon presence"
Jump to navigation
Jump to search
(Initial import) |
(formatting and smw) |
||
| Line 41: | Line 41: | ||
|- | |- | ||
| 4 | | 4 | ||
| − | | Check to see if anomalous pressures make geological sense. | + | | Check to see if anomalous pressures make geological sense. |
| + | * ''' Example: ''' Measured fluid pressure is [[pressure::250 psi]] over the static water pressure. The formation is believed to contain 30°API [[oil gravity|gravity]] oil, and the total vertical trap closure is [[length::500 ft]]. | ||
| + | * ''' Solution: ''' If the 250-psi pressure is due to the presence of a hydrocarbon column, then a column of [[depth::2500 ft]] of 30°API gravity oil would have to be present in the trap (assuming a freshwater gradient). Vertical trap closure is only [[length::500 ft]]; therefore, the measured formation pressure does not match the geology and is probably wrong. | ||
|} | |} | ||
Revision as of 15:08, 30 January 2014
| Exploring for Oil and Gas Traps | |
| |
| Series | Treatise in Petroleum Geology |
|---|---|
| Part | Critical elements of the petroleum system |
| Chapter | Formation fluid pressure and its application |
| Author | Edward A. Beaumont, Forrest Fiedler |
| Link | Web page |
| Store | AAPG Store |
Buoyancy pressures caused by hydrocarbon columns can be recognized by comparing hydrostatic pressure gradients with formation pressures. Pressures exceeding expected hydrostatic pressures could be due to the presence of hydrocarbon columns.
Two items are critical for detecting buoyancy pressure in a well:
- Accurate static water plot for the well
- Reliable formation fluid pressure measurements
This section discusses how to detect the presence of hydrocarbons using formation fluid pressures.
Procedure[edit]
The table below outlines a procedure for using pressures to detect the presence of a hydrocarbon column in a formation.
| Step | Action |
|---|---|
| 1 | Make a hydrostatic pressure-depth plot through the interval of interest. |
| 2 | Plot the pressure(s) measured from the interval of interest. |
| 3 | If the measured formation pressures are greater than the hydrostatic pressure, then the formation may contain a hydrocarbon column. |
| 4 | Check to see if anomalous pressures make geological sense.
|
See also[edit]
- Determining hydrostatic pressure gradient
- Static hydrocarbon pressure gradients
- Methods for obtaining formation fluid pressures
External links[edit]
| find literature about Buoyancy pressures and hydrocarbon presence |
|
|
|
|