Seismic data: identifying reflectors

From AAPG Wiki
Jump to navigation Jump to search
Exploring for Oil and Gas Traps
Series Treatise in Petroleum Geology
Part Predicting the occurrence of oil and gas traps
Chapter Interpreting seismic data
Author Christopher L. Liner
Link Web page
Store AAPG Store

Whether using VSP, synthetic seismogram, or log overlay, the final step is to compare the object to seismic traces in the vicinity of the well and find a fit.

Example

Figure 1 Sonic log converted to time and velocity. From Liner;[1] courtesy PennWell.

In Figure 1, a sonic log has been converted to time and velocity. Note that the time axis on the seismic section and the converted sonic log are linear, while the depth tick marks on the sonic are nonlinear. The geological horizons annotated on the sonic log are located via the depth ticks from picks on other logs (electric, gamma ray, etc.). It is important to realize that a sonic log never goes to the surface; there is always a gap for the surface casing. We do not expect time zero on the converted log to fit at time zero on the seismic section. In practice, the log is placed over the seismic section and shifted vertically until we are satisfied with the fit.

See also

References

  1. Liner, C., 1999, Elements of 3-D Seismology: Tulsa, PennWell.

External links

find literature about
Seismic data: identifying reflectors
Datapages button.png GeoScienceWorld button.png OnePetro button.png Google button.png