Search results
Jump to navigation
Jump to search
- * Do not rotate the drill string while tripping out.7 KB (1,083 words) - 20:50, 19 January 2022
- ...M91Ch2FG4.JPG|Figure 1]]). A drilling bit is attached to the end of a long string of jointed, hollow drill pipe, and the whole assembly is rotated by a motor ...way up the hole; instead, it is hung off inside the lower part of a casing string ([[:file:M91Ch2FG6.JPG|Figure 3]]).15 KB (2,385 words) - 15:05, 1 August 2016
- ...gth::10 ft]] of 2.5-in. core. The tool is attached to a conventional drill string and is lowered into the zone of interest. An integral arm pushes the core b7 KB (1,100 words) - 21:16, 19 January 2022
- ...sed to dip the core, not wire, because wire can rip the aluminum foil. The string should be cut off and the ends also dipped in the wax or plastic. This wax20 KB (2,971 words) - 15:46, 19 January 2022
- * drill string http://www.glossary.oilfield.slb.com/en/Terms/d/drillstring.aspx22 KB (3,024 words) - 21:42, 19 December 2014
- ...ition, salt or sulphur deposition, and the use of inhibitors in the tubing string. Another factor can be wellbore storage, which is the accumulation or deple11 KB (1,656 words) - 18:41, 20 January 2022
- ...mud through the turbine causes the attached bit to rotate while the drill string remains stationary. Drillers refer to this type of drilling as being in sli ...tubing.<ref name=Reynoldsandwatson_2003>Reynolds, H. and G. Watson, 2003, String design and application in through-tubing of rotary drilling (TTRD): Present24 KB (3,753 words) - 19:33, 3 March 2016
- ...ig5.png|{{figure number|5}}Wireline equipment, (a) Lubricator, (b) Typical string.12 KB (1,834 words) - 15:25, 24 January 2022
- ...figure number|6}}Flow regime in fracture a. trickle flow b. bubble flow c. string flow (Torsaeter, 1980) ...image) where bubble flow both fractured walls so there is bouyancy force; string flow (third image) fluids that appear constantly and wet phase follows frac29 KB (4,601 words) - 16:09, 12 April 2016
- ...imeters to [[length::10 m]] or more. Intervals are nomally broken by drill string connection points, core rubble zones, core spinoffs, and the tops and botto13 KB (1,964 words) - 20:50, 19 January 2022
- ...ype of equipment normally prone to such failure is the tubing, casing, rod string, downhole pumps, packers, gas lift valves, and plugs in the well bore ([[:f16 KB (2,540 words) - 18:41, 20 January 2022
- ...tion can be chosen by an analysis of regional structure maps using the bow string rule, [[lateral]] ramps, or drawing the section normal to the trend of the20 KB (2,865 words) - 19:24, 19 January 2022
- | Length || 9.88 m (32.4 ft) || 22.50 m (83.8 ft) || Tool string length18 KB (2,715 words) - 18:29, 8 February 2024
- ...tance of 2000 or 3000 m (6500 or 10,000 ft) within the borehole, the drill string to which the core barrel is attached will stretch under tension a few meter ...ing-while-drilling (LWD) logs are run as an integral part of the the drill string a short distance behind the drill bit (typically 1.5–24 m [5–80 ft]). T43 KB (6,686 words) - 13:44, 18 March 2019
- ...mud through the turbine causes the attached bit to rotate while the drill string remains stationary. Drillers refer to this type of drilling as being in sli22 KB (3,567 words) - 17:20, 11 March 2019
- ...h Donselaar and Overeem<ref name=Donselaarandovereem_2008 /> describe as a string-of-beads sandstone body. Crevasse splays may also link up one point bar wit32 KB (4,727 words) - 21:03, 15 January 2024
- | Legumes || Cow peas, French bean (string bean), gungo peas, red kidney beans83 KB (12,860 words) - 14:03, 10 April 2019