View source for Seismic interpretation: surface slicing

{{publication 
 | image   = exploring-for-oil-and-gas-traps.png
 | width   = 120px
 | series  = Treatise in Petroleum Geology
 | title   = Exploring for Oil and Gas Traps
 | part    = Predicting the occurrence of oil and gas traps
 | chapter = Interpreting 3-D seismic data
 | frompg  = 13-1
 | topg    = 13-27
 | author  = Geoffrey A. Dorn
 | link    = http://archives.datapages.com/data/specpubs/beaumont/ch13/ch13.htm
 | pdf     = 
 | store   = http://store.aapg.org/detail.aspx?id=545
 | isbn    = 0-89181-602-X
}}
Surface slicing is a novel approach to interpreting [[Seismic data|seismic]] horizons. This technique involves visualizing and interpreting areally finite portions of horizons on [[Seismic_data_-_mapping_with_two-dimensional_data#Time_slice_maps|time slice]] slabs of the data. The slab thickness is a weak function of the [[bandwidth]] of the data and a stronger function of the [[dip]] of the [[Seismic interpretation|reflections]]. For a detailed description of the technique see Stark.<ref name=ch13r12>Stark, T., J., 1996, Surface slice generation and interpretation—a review: The Leading Edge, vol. 15, p. 818–819, DOI: [http://library.seg.org/doi/abs/10.1190/1.1437369 10.1190/1.1437369].</ref>

The figures below show the general concept of the technique. [[:file:interpreting-3-d-seismic-data_fig13-7.png|Figure 1]] is a perspective view of a horizon structure (a) and the same structure split into 12-ms slabs and dissected (b). Suppose [[:file:interpreting-3-d-seismic-data_fig13-7.png|Figure 1]] represented a reflection (say a peak) in a 3-D survey. This structure could be cut into time slabs and dissected. [[:file:interpreting-3-d-seismic-data_fig13-8.png|Figure  2]] shows what these time-slice slabs might look like, where within each slab only the peaks are displayed. The dissected portions of the 3-D structure appear as annuli that fit perfectly within each other. Interpreting the horizon consists of selecting those elements that fit together, somewhat like assembling a jigsaw puzzle.

[[file:interpreting-3-d-seismic-data_fig13-7.png|300px|thumb|{{figure number|1}}Perspective view of a horizon structure (a) and the same structure split into 12-ms slabs and dissected (b). From Stark.<ref name=ch13r12 /> Courtesy SEG.]]

[[file:interpreting-3-d-seismic-data_fig13-8.png|300px|thumb|{{figure number|2}}Time-slice slabs where within each slab only the peaks are displayed. From Stark.<ref name=ch13r12 /> Courtesy SEG.]]

==Surface slicing assumptions==
For an interpreter who is practiced in surface slice picking and in the appropriate settings of the various parameters that control the algorithm, surface slicing can be an extremely efficient way to interpret horizons. Since entire areas on the horizon are picked with each click of the mouse button, this technique is not very sensitive to the number of traces in the 3-D survey. It assumes local continuity and connectivity in the data, and it assumes a consistent phase is being interpreted. It is less sensitive to discontinuities and poor [[signal-to-noise ratio]] than [[Picking_horizons_in_3-D_data#Voxel_tracking|voxel tracking]] or [[Picking_horizons_in_3-D_data#Autopicking|autotracking]] because it is not entirely an automatic technique; the interpreter controls the technique and frequently can achieve better results because interpretive judgment can be applied.

==See also==
* [[Data preview]]
* [[Two- or three-dimensional interpretation]]
* [[Picking horizons in 3-D data]]

==References==
{{reflist}}

==External links==
{{search}}
* [http://archives.datapages.com/data/specpubs/beaumont/ch13/ch13.htm Original content in Datapages]
* [http://store.aapg.org/detail.aspx?id=545 Find the book in the AAPG Store]

[[Category:Predicting the occurrence of oil and gas traps]] 
[[Category:Interpreting 3-D seismic data]]