Difference between revisions of "Smear-gouge ratio"
Jump to navigation
Jump to search
FWhitehurst (talk | contribs) |
Cwhitehurst (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | Smear-gouge ratio is the ratio of sand to shale that has moved past some critical portion of the fault plane | + | Smear-gouge ratio is the ratio of sand to shale that has moved past some critical portion of the fault plane.<ref>Skerlec, G. M., 1996, Risking fault seal in the Gulf Coast (abs.): AAPG Annual Convention Program and Abstracts, v. 5, |
| + | p. A131.</ref> Although not simply relatable to the shale gouge ratio, the smear gouge ratio varies in an inverse manner; i.e., high shale gouge ratio corresponds to low smear gouge ratio and vice versa. | ||
Both ratios are commonly called SGR. | Both ratios are commonly called SGR. | ||
| − | http://archives.datapages.com/data/bulletns/1997/06jun/0897/0897.htm | + | ==Further Reading== |
| + | * Yielding, G., B. Freeman, and D. T. Needham, 1997, [http://archives.datapages.com/data/bulletns/1997/06jun/0897/0897.htm Quantitative Fault Seal Prediction]: AAPG Bulletin, vol. 81, no. 6, p 897. | ||
| − | + | ==References== | |
| − | + | {{reflist}} | |
| − | |||
Revision as of 16:59, 6 November 2014
Smear-gouge ratio is the ratio of sand to shale that has moved past some critical portion of the fault plane.[1] Although not simply relatable to the shale gouge ratio, the smear gouge ratio varies in an inverse manner; i.e., high shale gouge ratio corresponds to low smear gouge ratio and vice versa.
Both ratios are commonly called SGR.
Further Reading
- Yielding, G., B. Freeman, and D. T. Needham, 1997, Quantitative Fault Seal Prediction: AAPG Bulletin, vol. 81, no. 6, p 897.
References
- ↑ Skerlec, G. M., 1996, Risking fault seal in the Gulf Coast (abs.): AAPG Annual Convention Program and Abstracts, v. 5, p. A131.