− | Displacement pressure (P<sub>d</sub>) is the pressure necessary to force hydrocarbons into the pore space of a rock and form a continuous hydrocarbon filament.<ref name=ch10r67>Schowalter, T. T., 1979, [http://archives.datapages.com/data/bulletns/1977-79/data/pg/0063/0005/0700/0723.htm Mechanics of secondary hydrocarbon migration and entrapment]: AAPG Bulletin, vol. 63, no. 5, p. 723–760.</ref> Displacement pressure, which is measured in dynes/cm<sup>2</sup>, can be calculated by the following formula: | + | [[Displacement pressure]] (P<sub>d</sub>) is the pressure necessary to force hydrocarbons into the pore space of a rock and form a continuous hydrocarbon filament.<ref name=ch10r67>Schowalter, T. T., 1979, [http://archives.datapages.com/data/bulletns/1977-79/data/pg/0063/0005/0700/0723.htm Mechanics of secondary hydrocarbon migration and entrapment]: AAPG Bulletin, vol. 63, no. 5, p. 723–760.</ref> Displacement pressure, which is measured in dynes/cm<sup>2</sup>, can be calculated by the following formula: |
− | The wettability, or contact angle θ, is 0° for hydrocarbon/water.<ref name=ch10r5>Berg, R. R., 1975, [http://archives.datapages.com/data/bulletns/1974-76/data/pg/0059/0006/0900/0939.htm Capillary pressure in stratigraphic traps]: AAPG Bulletin, vol. 59, no. 6, p. 939–956.</ref> If the wetting phase is oil or gas rather than water, the contact angle can range from 0 to 180°. Not all rocks are water wet, and oil-wet seals may not be as rare as commonly thought.<ref name=ch10r15>Cuiec, L., 1987, [[Wettability]] and oil reservoirs, in J. Kleppe, E. W. Berg, A. T. Buller, O. Hjemeland, and O. Torsaeter, eds., North Sea Oil and Gas Reservoirs: London, Graham and Trotman, p. 193–207.</ref> Organic-rich sediments may be source, seal, and oil wet. | + | The [[wettability]], or contact angle θ, is 0° for hydrocarbon/water.<ref name=ch10r5>Berg, R. R., 1975, [http://archives.datapages.com/data/bulletns/1974-76/data/pg/0059/0006/0900/0939.htm Capillary pressure in stratigraphic traps]: AAPG Bulletin, vol. 59, no. 6, p. 939–956.</ref> If the wetting phase is oil or gas rather than water, the contact angle can range from 0 to 180°. Not all rocks are water wet, and oil-wet seals may not be as rare as commonly thought.<ref name=ch10r15>Cuiec, L., 1987, [[Wettability]] and oil reservoirs, in J. Kleppe, E. W. Berg, A. T. Buller, O. Hjemeland, and O. Torsaeter, eds., North Sea Oil and Gas Reservoirs: London, Graham and Trotman, p. 193–207.</ref> Organic-rich sediments may be source, seal, and oil wet. |