Changes

Jump to navigation Jump to search
3 bytes removed ,  20:22, 17 January 2014
Line 37: Line 37:  
===Scales and precipitates===
 
===Scales and precipitates===
   −
Plugged or inadequate perforations have the same effect as partial penetration; that is, reservoir fluids are restricted from flowing into the wellbore. Perforations can become plugged with scale or other solid particles that are precipitated from formation fluids (see “Rock-Water Interactions: Formation Damage”). As these fluids are produced, equilibrium conditions of pressure and temperature become altered (especially near the wellbore) causing precipitation of these particles. Some precipitates can form when incompatible fluids come in contact downhole. Workover and completion fluids should be tested with formation fluids for compatibility. Precipitates can also occur in a formation after an acid treatment.
+
Plugged or inadequate perforations have the same effect as partial penetration; that is, reservoir fluids are restricted from flowing into the wellbore. Perforations can become plugged with scale or other solid particles that are precipitated from formation fluids (see [[Rock-water Interaction: formation damage]]). As these fluids are produced, equilibrium conditions of pressure and temperature become altered (especially near the wellbore) causing precipitation of these particles. Some precipitates can form when incompatible fluids come in contact downhole. Workover and completion fluids should be tested with formation fluids for compatibility. Precipitates can also occur in a formation after an acid treatment.
    
The most common types of scale are calcium carbonate and calcium sulfate (gypsum). Sodium chloride (salt), sulfur, and other minerals can also be precipitated under certain conditions. The formation of these scales or solids can be minimized or prevented through use of chemical inhibitors, provided the produced fluids are analyzed ahead of time. If not, it may be necessary to perform a workover to clean out the well.
 
The most common types of scale are calcium carbonate and calcium sulfate (gypsum). Sodium chloride (salt), sulfur, and other minerals can also be precipitated under certain conditions. The formation of these scales or solids can be minimized or prevented through use of chemical inhibitors, provided the produced fluids are analyzed ahead of time. If not, it may be necessary to perform a workover to clean out the well.

Navigation menu