10,351
edits
Changes
Jump to navigation
Jump to search
Line 23:
Line 23: − The following figure summarizes the various controls on percent fill and hydrocarbon column height. The maximum fill case is the synclinal spill point (SSP). A cross-leaking fault limits the percent fill to the juxtaposed lithology leak point (JLLP). A dip-leaking fault limits the percent fill to the fault plane leak point (FPLP).+ + + + − − [[file:evaluating-top-and-fault-seal_fig10-14.png|thumb|{{figure number|10-14}}See text for explanation.]]
Percent fill: controlling factors (view source)
Revision as of 22:46, 3 February 2014
, 22:46, 3 February 2014no edit summary
==Control summary==
==Control summary==
[[file:evaluating-top-and-fault-seal_fig10-14.png|thumb|{{figure number|1}}See text for explanation.]]
[[:file:evaluating-top-and-fault-seal_fig10-14.png|Figure 1]] summarizes the various controls on percent fill and hydrocarbon column height. The maximum fill case is the synclinal spill point (SSP). A cross-leaking fault limits the percent fill to the juxtaposed lithology leak point (JLLP). A dip-leaking fault limits the percent fill to the fault plane leak point (FPLP).
A cross-sealing fault allows fill below the JLLP and possibly as deep as the SSP. A trap also may be partially filled (PF) due to either charge or top seal capacity. A partially filled trap can have a hydrocarbon contact at any depth.
A cross-sealing fault allows fill below the JLLP and possibly as deep as the SSP. A trap also may be partially filled (PF) due to either charge or top seal capacity. A partially filled trap can have a hydrocarbon contact at any depth.
==Finite seal capacity of faults==
==Finite seal capacity of faults==