Changes

Using a 360 degree compass, shown in [[:Image:Drive-mechanisms-and-recovery_fig3.png|Figure 3]],... the plot of the above metes and bounds property description use[s] the following procedure:

Using a 360 degree compass, shown in [[:Image:Drive-mechanisms-and-recovery_fig3.png|Figure 3]],... the plot of the above metes and bounds property description use[s] the following procedure:

# Place the center of the compass at the point of beginning of the line of course, designated as Point A in Figure 4a, with the north and south line of the compass coinciding with the line selected to be the north and south line of the map. [Editor's note: A ''course'' is the combination of the direction and length of any particular line, such as "north 40° east, 200 ft."]

# Place the center of the compass at the point of beginning of the line of course, designated as Point A in [[:Image:Drive-mechanisms-and-recovery_fig4.png|Figure 4a]], with the north and south line of the compass coinciding with the line selected to be the north and south line of the map. [Editor's note: A ''course'' is the combination of the direction and length of any particular line, such as "north 40° east, 200 ft."]

# Then lay off 40 degrees from north toward the east and draw a line through this point. With the scale, measure off the first distance, which is 200 feet, and which will be Point B.

# Then lay off 40 degrees from north toward the east and draw a line through this point. With the scale, measure off the first distance, which is 200 feet, and which will be Point B.

# ... The process is repeated using the data for the second course ... and for the remaining calls and distances, as shown in Figure 4b.

# ... The process is repeated using the data for the second course ... and for the remaining calls and distances, as shown in [[:Image:Drive-mechanisms-and-recovery_fig4.png|Figure 4b]].

[[File:Drive-mechanisms-and-recovery fig4.png|thumbnail|'''Figure 4.''']]

[[File:Drive-mechanisms-and-recovery fig4.png|thumbnail|'''Figure 4.''']]