Saturations required for hydrocarbon flow
Traditional definitions
Hydrocarbons flow through a water-wet seal when there is a continuous, interconnected pathway of hydrocarbon-filled pore space. Flow through a seal occurs with saturations of 4.5–17% of the rock pore volume, averaging 10%.[1] This is one reason displacement pressure is defined at 10% saturation.
Possible modifications
Other experiments, including lower porosity rocks, indicate much higher oil saturations of 25–91% may be required.[2] The current assumption that seal capacity is based upon the displacement pressure at only 10% saturation could be very misleading. The value could be two or more orders of magnitude greater than that predicted at 10% saturation.
See also
References
- ↑ Schowalter, T., T., 1979, Mechanics of secondary hydrocarbon migration and entrapment: AAPG Bulletin, vol. 63, no. 5, p. 723–760.
- ↑ England, W., A., Mackenzie, A., S., Mann, D., M., Quickley, T., M., 1987, The movement and entrapment of petroleum fluids in the subsurface: Journal of the Geological Society, London, vol. 144, no. 2, p. 327–347.
External links
| find literature about Saturations required for hydrocarbon flow |
|
|
|
|