Difference between revisions of "Dip"

From AAPG Wiki
Jump to navigation Jump to search
(Created page with "True dip is the angle between an inclined surface and the horizontal, measured perpendicular to a horizontal line in the plane (strike). The dip seen in a limited data set...")
 
Line 1: Line 1:
True dip is the angle between an inclined surface and the horizontal, measured perpendicular to a horizontal line in the plane ([[strike]]). The dip seen in a limited data set (well bore, outcrop, cross section, seismic line, etc.) may not be perpendicular but rather cut at an angle, and is the apparent dip; this is less that the true dip.
+
True dip is the angle between an inclined surface and the horizontal, measured perpendicular to a horizontal line in the plane ([[strike]]). The dip seen in a limited data set (well bore, outcrop, cross section, seismic line, etc.) may not be perpendicular but rather cut at an angle, and is the apparent dip; this is less that the true dip.it is usually written as 4S (dipping 4 degrees  in the southerly option perpendicular to strike; this requires that a strike be given), 4 SE (likewise), or 4 65SE (dipping 4 degrees in a 65SE direction; this by inference gives the strike, because it is perpendicular).
  
 
{{stub}}
 
{{stub}}

Revision as of 22:15, 6 March 2014

True dip is the angle between an inclined surface and the horizontal, measured perpendicular to a horizontal line in the plane (strike). The dip seen in a limited data set (well bore, outcrop, cross section, seismic line, etc.) may not be perpendicular but rather cut at an angle, and is the apparent dip; this is less that the true dip.it is usually written as 4S (dipping 4 degrees in the southerly option perpendicular to strike; this requires that a strike be given), 4 SE (likewise), or 4 65SE (dipping 4 degrees in a 65SE direction; this by inference gives the strike, because it is perpendicular).

This article is a stub. You can help AAPG Wiki by expanding it.