Changes

In shallow water, typically about 6–45 m (20–150 ft) deep, drilling is conducted by a jackup rig. A jackup is a rig that has three or more legs that sit on the sea floor. In moderately deep water (more than 45 m [150 ft] deep), a floating or semisubmersible rig is used. The semisubmersible rig is kept in place by several anchors.<ref name=Reed_1992>Reed, B., 1992, [[Offshore rigs]], ''in'' D. Morton-Thompson and A. M. Woods, eds., Development geology reference manual: AAPG Methods in Exploration Series 10, p. 65-66.</ref>

In shallow water, typically about 6–45 m (20–150 ft) deep, drilling is conducted by a jackup rig. A jackup is a rig that has three or more legs that sit on the sea floor. In moderately deep water (more than 45 m [150 ft] deep), a floating or semisubmersible rig is used. The semisubmersible rig is kept in place by several anchors.<ref name=Reed_1992>Reed, B., 1992, [[Offshore rigs]], ''in'' D. Morton-Thompson and A. M. Woods, eds., Development geology reference manual: AAPG Methods in Exploration Series 10, p. 65-66.</ref>

In deep water, a drill ship is the preferred option. Deep water is defined as water depths between 500 and 2000 m (1640 and 6562 ft).<ref name=Weimerandslatt_2004>Weimer, P., and R. M. Slatt, 2004, Petroleum systems of deep-water settings: Society of Exploration Geophysicists/European Association of Geoscientists and Engineers Distinguished Instructor Series 7, 465 p.</ref> The drill ship is maintained in place by dynamic positioning. Computers constantly calculate the position of the drill ship using global positioning system technology or in response to signals from transducers on the sea bed. Signals are sent to propellers and lateral thrusters on the sides of the vessel. These readjust the location of the ship to keep it stable against the forces of wind and water currents.

In deep water, a drill ship is the preferred option. Deep water is defined as water depths between 500 and 2000 m (1640 and 6562 ft).<ref name=Weimerandslatt_2004>Weimer, P., and R. M. Slatt, 2004, Petroleum systems of deep-water settings: Society of Exploration Geophysicists/European Association of Geoscientists and Engineers Distinguished Instructor Series 7, 465 p.</ref> The drill ship is maintained in place by dynamic positioning. Computers constantly calculate the position of the drill ship using global positioning system technology or in response to signals from transducers on the sea bed. Signals are sent to propellers and [[lateral]] thrusters on the sides of the vessel. These readjust the location of the ship to keep it stable against the forces of wind and water currents.

[[File:M91Ch2FG6.JPG|thumb|300px|{{figure number|3}}A well is not drilled all the way through. Metal casing strings are run to isolate specific sections of the hole before drilling further.]]

[[File:M91Ch2FG6.JPG|thumb|300px|{{figure number|3}}A well is not drilled all the way through. Metal casing strings are run to isolate specific sections of the hole before drilling further.]]