Changes

Jump to navigation Jump to search
80 bytes added ,  21:18, 19 January 2022
m
Line 13: Line 13:  
  | isbn    = 0891816607
 
  | isbn    = 0891816607
 
}}
 
}}
Drilling problems include any difficulties encountered while drilling a well. The most common drilling problems are the creation of doglegs and key seats, hole instability, lost circulation, and excessive bottom hole temperatures.
+
Drilling problems include any difficulties encountered while [[drilling a well]]. The most common drilling problems are the creation of doglegs and key seats, hole instability, lost circulation, and excessive bottom hole temperatures.
    
==Doglegs==
 
==Doglegs==
Line 63: Line 63:  
==Bottom hole temperatures==
 
==Bottom hole temperatures==
   −
Extremely high bottom hole temperatures can occur in deep wellbores or in areas of abnormally high [http://www.glossary.oilfield.slb.com/en/Terms.aspx?LookIn=term%20name&filter=geothermal%20gradient geothermal gradient]. These excessively high bottom hole temperatures (greater than [[temperature::250°C]]) can cause drilling problems because of the accelerated thickening of water-based drilling fluids. The increase in viscosity and density of the drilling can may result in the following:
+
Extremely high bottom hole temperatures can occur in deep wellbores or in areas of abnormally high [[geothermal gradient]]. These excessively high bottom hole temperatures (greater than [[temperature::250°C]]) can cause drilling problems because of the accelerated thickening of [[Drilling_fluid#Water-based_muds|water-based drilling fluids]]. The increase in [[viscosity]] and density of the drilling can may result in the following:
    
* Reduction in penetration rates
 
* Reduction in penetration rates
 
* Lost circulation
 
* Lost circulation
* The well being swabbed when drill pipe is pulled
+
* The well being [http://www.glossary.oilfield.slb.com/en/Terms/s/swab.aspx swabbed] when drill pipe is pulled
 
* Stuck tools
 
* Stuck tools
   −
This problem can be mitigated by using oil-based muds.
+
This problem can be mitigated by using [[Drilling_fluid#Oil-based_muds|oil-based muds]].
    
==See also==
 
==See also==
Line 91: Line 91:  
[[Category:Engineering]]
 
[[Category:Engineering]]
 
[[Category:Engineering – Development and Operations]]
 
[[Category:Engineering – Development and Operations]]
 +
[[Category:Methods in Exploration 10]]

Navigation menu