Changes

! Lithology || Gamma Ray Values (in API units)

! Lithology || Gamma Ray Values (in API units)

|-

|-

| [[Sandstone]] (quartz) || 15–30 (rarely to 200)

| [[Sandstone]] ([[quartz]]) || 15–30 (rarely to 200)

|-

|-

| [[Limestone]] || 10–40

| [[Limestone]] || 10–40

* ''Radioactive minerals'' in sands, especially K-feldspar, zircon, and mica, can raise sand readings as high as adjacent shales. Gamma ray logs may be useless in immature sands derived from [[basement]] terranes. However, beach placers rich in zircon may be valuable correlative markers if not mistaken for shale.

* ''Radioactive minerals'' in sands, especially K-feldspar, zircon, and mica, can raise sand readings as high as adjacent shales. Gamma ray logs may be useless in immature sands derived from [[basement]] terranes. However, beach placers rich in zircon may be valuable correlative markers if not mistaken for shale.

* ''“Hot” dolomite'', especially common in the Permian basin in the United States, may have gamma ray values up to 200 API units, resembling shale.

* ''“Hot” dolomite'', especially common in the [[Permian basin]] in the United States, may have gamma ray values up to 200 API units, resembling shale.

* ''Radioactive (KCl) muds'' raise the baseline gamma ray zero reading so that apparent values for all rock types are increased, sometimes by about 20 API units.

* ''Radioactive (KCl) muds'' raise the baseline gamma ray zero reading so that apparent values for all rock types are increased, sometimes by about 20 API units.

* ''Evanescent high gamma ray'' readings in sands, present on one logging run but vanished some weeks later, have been observed especially in steamflood conditions. While remaining enigmatic, these may be due to concentrations of radon in the pore space.

* ''Evanescent high gamma ray'' readings in sands, present on one logging run but vanished some weeks later, have been observed especially in steamflood conditions. While remaining enigmatic, these may be due to concentrations of radon in the pore space.

====Sandstone====

====Sandstone====

Quartz should read 1.7 to 1.8 barns/electron, but most other minerals can raise the value substantially. Because they are usually present, the log is of limited value.

[[Quartz]] should read 1.7 to 1.8 barns/electron, but most other minerals can raise the value substantially. Because they are usually present, the log is of limited value.

====Limestone====

====Limestone====

===Overlay presentation===

===Overlay presentation===

Manual crossplotting is tedious. A much faster way to visualize rock type is directly from the overlay presentation in which both neutron and density logs are superimposed in the same log track. To do this, a compatible scale must be used so that the porosity components of both logs exactly overlay. Then any offset (or residual) between the two logs is attributable to lithology or to the presence of gas.

Manual crossplotting is tedious. A much faster way to visualize rock type is directly from the overlay presentation in which both neutron and density logs are superimposed in the same log track. To do this, a compatible scale must be used so that the porosity components of both logs exactly overlay. Then any [[offset]] (or residual) between the two logs is attributable to lithology or to the presence of gas.

Both tools are generally calibrated in limestone units, so the compatible scale is defined for freshwater-limestone systems, with theoretical limits as follows:

Both tools are generally calibrated in limestone units, so the compatible scale is defined for freshwater-limestone systems, with theoretical limits as follows:

====Sandstone (Oil or Water Filled)====

====Sandstone (Oil or Water Filled)====

Clean quartz sandstones give the typical two-division neutron-density cross-over with density to the left of neutron ([[:file:quick-look-lithology-from-logs_fig1.png|Figure 1]]). The addition of some clay (forming shaly sandstone) increases the neutron reading, reducing log crossover or even reversing it to create separation. Check natural gamma ray for evidence of increasing clay.

Clean [[quartz]] sandstones give the typical two-division neutron-density cross-over with density to the left of neutron ([[:file:quick-look-lithology-from-logs_fig1.png|Figure 1]]). The addition of some clay (forming shaly sandstone) increases the neutron reading, reducing log crossover or even reversing it to create separation. Check natural gamma ray for evidence of increasing clay.

Heavier components such as mica increase the density, reducing log cross-over or even reversing it to create separation. Check spectral gamma ray to distinguish the following:

Heavier components such as mica increase the density, reducing log cross-over or even reversing it to create separation. Check spectral gamma ray to distinguish the following:

[[Category:Wireline methods]]

[[Category:Wireline methods]]