1,705
edits
Changes
Jump to navigation
Jump to search
Pc curves and saturation profiles (view source)
Revision as of 20:22, 31 January 2014
, 20:22, 31 January 2014Initial import
{{publication
| image = exploring-for-oil-and-gas-traps.png
| width = 120px
| series = Treatise in Petroleum Geology
| title = Exploring for Oil and Gas Traps
| part = Predicting the occurrence of oil and gas traps
| chapter = Predicting reservoir system quality and performance
| frompg = 9-1
| topg = 9-156
| author = Dan J. Hartmann, Edward A. Beaumont
| link = http://archives.datapages.com/data/specpubs/beaumont/ch09/ch09.htm
| pdf =
| store = http://store.aapg.org/detail.aspx?id=545
| isbn = 0-89181-602-X
}}
Water–hydrocarbon saturation profiles for a reservoir can be approximated using the [[capillary pressure]] (P<sub>c</sub>) curves for the flow units it contains. The data in a P<sub>c</sub> curve can be converted to give the following:
* An estimate of [[buoyancy pressure]]s required to enter the pore throats of flow units.
* The radius of pore throats entered at a given buoyancy pressure.
* The water–hydrocarbon saturation of a flow unit at different buoyancy pressures.
Placing flow units into structural cross sections shows their position with respect to the [[free water level]] and buoyancy pressure profile. Using the structure sections, saturation profiles can be made for each flow unit, their corresponding containers, and the reservoir as a whole.
==Pore throat size and saturation profiles==
Water in the pore throats of rocks with macroporosity offers little capillary resistance to migrating hydrocarbons compared with the pore throats of rocks with microporosity. As a result, oil and gas migrate through a rock with macroporosity with minimal buoyancy pressure, i.e., hydrocarbon column. Macropore reservoirs have little or no saturation transition zone.
In rocks with microporosity, capillary forces hold water tightly to rock surfaces, decreasing the effective size of the already small pore throats. Therefore, a greater buoyancy pressure is required for oil or gas to migrate. Micropore reservoirs have longer saturation transition zones than macro- or mesoporous reservoirs; immobile water saturation is lower in macroporous rocks.
In the example reservoir cross section below, the rock in container 1 is mesoporous; the rock in container 2 is macroporous. Container 1 has a longer transition zone than container 2 because of this. Both containers have the same buoyancy pressure and free water level because the two containers are in pressure communication.
[[file:predicting-reservoir-system-quality-and-performance_fig9-22.png|thumb|{{figure number|9-22}}See text for explanation.]]
==Pore throat size sorting==
The graph below shows hypothetical examples of P<sub>c</sub> curves for rocks with varying pore throat size sorting. The r<sub>35</sub> value is the same for each sample; therefore, all three curves pass through the same point. The curves labeled A illustrate different pore throat size sorting. If the pore throats of the sample have a narrow range of sizes (i.e., are well sorted), the P<sub>c</sub> curve will be flat as the pressure in the mercury reaches the entry pressure for those pore throats. If the range of pore throat sizes is wide, the curve will steepen.
[[file:predicting-reservoir-system-quality-and-performance_fig9-23.png|thumb|{{figure number|9-23}}See text for explanation.]]
==Making s<sub>w</sub> profiles from p<sub>c</sub> curves==
If a P<sub>c</sub> curve is available, then a profile of S<sub>w</sub> can be approximated using information from the curve. To make an S<sub>w</sub> profile of a reservoir using a P<sub>c</sub> curve, use the table below.
{| class = "wikitable"
|-
! Step
! Action
|-
| 1
| Convert pressure scale (Y-axis) to hydrocarbon column length ( ''h'' ), where h = P<sub>c</sub> × conversion factor (if conversion is unknown, use 0.7 for oil and 0.4 for gas).
|-
| 2
| Using the same scales, plot the curve next to a structure section showing the trap. Place the base of the curve at the free water level (see Figure 9-23).
|-
| 3
| Estimate S<sub>w</sub> for any point in the reservoir by reading the S<sub>w</sub> that corresponds to the depth.
|}
==See also==
* [[Pore–fluid interaction]]
* [[Hydrocarbon expulsion, migration, and accumulation]]
* [[Characterizing rock quality]]
* [[Converting Pc curves to buoyancy, height, and pore throat radius]]
* [[What is permeability?]]
* [[Relative permeability and pore type]]
==External links==
{{search}}
* [http://archives.datapages.com/data/specpubs/beaumont/ch09/ch09.htm Original content in Datapages]
* [http://store.aapg.org/detail.aspx?id=545 Find the book in the AAPG Store]
[[Category:Predicting the occurrence of oil and gas traps]]
[[Category:Predicting reservoir system quality and performance]]
| image = exploring-for-oil-and-gas-traps.png
| width = 120px
| series = Treatise in Petroleum Geology
| title = Exploring for Oil and Gas Traps
| part = Predicting the occurrence of oil and gas traps
| chapter = Predicting reservoir system quality and performance
| frompg = 9-1
| topg = 9-156
| author = Dan J. Hartmann, Edward A. Beaumont
| link = http://archives.datapages.com/data/specpubs/beaumont/ch09/ch09.htm
| pdf =
| store = http://store.aapg.org/detail.aspx?id=545
| isbn = 0-89181-602-X
}}
Water–hydrocarbon saturation profiles for a reservoir can be approximated using the [[capillary pressure]] (P<sub>c</sub>) curves for the flow units it contains. The data in a P<sub>c</sub> curve can be converted to give the following:
* An estimate of [[buoyancy pressure]]s required to enter the pore throats of flow units.
* The radius of pore throats entered at a given buoyancy pressure.
* The water–hydrocarbon saturation of a flow unit at different buoyancy pressures.
Placing flow units into structural cross sections shows their position with respect to the [[free water level]] and buoyancy pressure profile. Using the structure sections, saturation profiles can be made for each flow unit, their corresponding containers, and the reservoir as a whole.
==Pore throat size and saturation profiles==
Water in the pore throats of rocks with macroporosity offers little capillary resistance to migrating hydrocarbons compared with the pore throats of rocks with microporosity. As a result, oil and gas migrate through a rock with macroporosity with minimal buoyancy pressure, i.e., hydrocarbon column. Macropore reservoirs have little or no saturation transition zone.
In rocks with microporosity, capillary forces hold water tightly to rock surfaces, decreasing the effective size of the already small pore throats. Therefore, a greater buoyancy pressure is required for oil or gas to migrate. Micropore reservoirs have longer saturation transition zones than macro- or mesoporous reservoirs; immobile water saturation is lower in macroporous rocks.
In the example reservoir cross section below, the rock in container 1 is mesoporous; the rock in container 2 is macroporous. Container 1 has a longer transition zone than container 2 because of this. Both containers have the same buoyancy pressure and free water level because the two containers are in pressure communication.
[[file:predicting-reservoir-system-quality-and-performance_fig9-22.png|thumb|{{figure number|9-22}}See text for explanation.]]
==Pore throat size sorting==
The graph below shows hypothetical examples of P<sub>c</sub> curves for rocks with varying pore throat size sorting. The r<sub>35</sub> value is the same for each sample; therefore, all three curves pass through the same point. The curves labeled A illustrate different pore throat size sorting. If the pore throats of the sample have a narrow range of sizes (i.e., are well sorted), the P<sub>c</sub> curve will be flat as the pressure in the mercury reaches the entry pressure for those pore throats. If the range of pore throat sizes is wide, the curve will steepen.
[[file:predicting-reservoir-system-quality-and-performance_fig9-23.png|thumb|{{figure number|9-23}}See text for explanation.]]
==Making s<sub>w</sub> profiles from p<sub>c</sub> curves==
If a P<sub>c</sub> curve is available, then a profile of S<sub>w</sub> can be approximated using information from the curve. To make an S<sub>w</sub> profile of a reservoir using a P<sub>c</sub> curve, use the table below.
{| class = "wikitable"
|-
! Step
! Action
|-
| 1
| Convert pressure scale (Y-axis) to hydrocarbon column length ( ''h'' ), where h = P<sub>c</sub> × conversion factor (if conversion is unknown, use 0.7 for oil and 0.4 for gas).
|-
| 2
| Using the same scales, plot the curve next to a structure section showing the trap. Place the base of the curve at the free water level (see Figure 9-23).
|-
| 3
| Estimate S<sub>w</sub> for any point in the reservoir by reading the S<sub>w</sub> that corresponds to the depth.
|}
==See also==
* [[Pore–fluid interaction]]
* [[Hydrocarbon expulsion, migration, and accumulation]]
* [[Characterizing rock quality]]
* [[Converting Pc curves to buoyancy, height, and pore throat radius]]
* [[What is permeability?]]
* [[Relative permeability and pore type]]
==External links==
{{search}}
* [http://archives.datapages.com/data/specpubs/beaumont/ch09/ch09.htm Original content in Datapages]
* [http://store.aapg.org/detail.aspx?id=545 Find the book in the AAPG Store]
[[Category:Predicting the occurrence of oil and gas traps]]
[[Category:Predicting reservoir system quality and performance]]