Changes

  | part    = Predicting the occurrence of oil and gas traps

  | part    = Predicting the occurrence of oil and gas traps

  | chapter = Predicting reservoir system quality and performance

  | chapter = Predicting reservoir system quality and performance

  | frompg  = 9-1

  | frompg  = 9-27

  | topg    = 9-156

  | topg    = 9-28

  | author  = Dan J. Hartmann, Edward A. Beaumont

  | author  = Dan J. Hartmann, Edward A. Beaumont

  | link    = http://archives.datapages.com/data/specpubs/beaumont/ch09/ch09.htm

  | link    = http://archives.datapages.com/data/specpubs/beaumont/ch09/ch09.htm

  | isbn    = 0-89181-602-X

  | isbn    = 0-89181-602-X

}}

}}

The pores and fluids of a reservoir system interact during the processes of expulsion, [[migration]], accumulation, and flow to a wellbore. Differential pressure (ΔP) in the fluid continuum of the [[petroleum system]], caused by properties of fluids and pores, controls these processes.

The pores and fluids of a reservoir system interact during the processes of expulsion, [[migration]], [[accumulation]], and flow to a wellbore. Differential pressure (ΔP) in the fluid continuum of the [[petroleum system]], caused by properties of fluids and pores, controls these processes.

==Expulsion==

==Expulsion==

Expulsion describes the movement of hydrocarbons from the petroleum source rock into the carrier bed or migration conduit.  The expulsion event is driven by a combination of factors that include compaction, chemical reactions, source richness, kerogen type, and thermal expansion.  Hydrocarbon generation causes pressure build-up in the [[source rock]], exceeding the pore pressure of the adjacent carrier bed. Oil or gas is expelled or “squeezed” into the carrier bed due to the differential pressures between source rock and fluid in the carrier bed.

Expulsion describes the movement of hydrocarbons from the petroleum source rock into the carrier bed or migration conduit.  The expulsion event is driven by a combination of factors that include compaction, chemical reactions, source richness, [[kerogen]] type, and thermal expansion.  [[Petroleum generation|Hydrocarbon generation]] causes pressure build-up in the [[source rock]], exceeding the pore pressure of the adjacent carrier bed. Oil or gas is expelled or “squeezed” into the carrier bed due to the differential pressures between source rock and fluid in the carrier bed.

==Migration==

==Migration==

==Buoyancy pressure profile==

==Buoyancy pressure profile==

[[file:predicting-reservoir-system-quality-and-performance_fig9-15.png|thumb|{{figure number|2}}Relationship between the hydrocarbon gradient and water gradient. From Coalson et al.<ref name=Coalsonetal_1994>Coalson, E. B., S. M. Goolsby, and M. H. Franklin, 1994, Subtle seals and fluid-flow barriers in carbonate rocks, ''in'' J. C. Dolson, M. L. Hendricks, and W. A. Wescott, eds., Unconformity related hydrocarbons in sedimentary sequences: Rocky Mountain Association of Geologists (RMAG) Guidebook for Petroleum Exploration and Exploitation in Clastic and Carbonate Sediments, p. 45-58.</ref> Courtesy RMAG.]]

[[file:predicting-reservoir-system-quality-and-performance_fig9-15.png|300px|thumb|{{figure number|2}}Relationship between the hydrocarbon gradient and water gradient. From Coalson et al.<ref name=Coalsonetal_1994>Coalson, E. B., S. M. Goolsby, and M. H. Franklin, 1994, Subtle seals and fluid-flow barriers in carbonate rocks, ''in'' J. C. Dolson, M. L. Hendricks, and W. A. Wescott, eds., Unconformity related hydrocarbons in sedimentary sequences: Rocky Mountain Association of Geologists (RMAG) Guidebook for Petroleum Exploration and Exploitation in Clastic and Carbonate Sediments, p. 45-58.</ref> Courtesy RMAG.]]

When a reservoir has formed in a trap and has come to pressure equilibrium with the water in the aquifer, the pore pressure of the hydrocarbons at different depths in the reservoir plot along a steeper gradient than the water gradient. [[:file:predicting-reservoir-system-quality-and-performance_fig9-15.png|Figure 2]] shows this relationship.

When a reservoir has formed in a trap and has come to pressure equilibrium with the water in the aquifer, the pore pressure of the hydrocarbons at different depths in the reservoir plot along a steeper gradient than the water gradient. [[:file:predicting-reservoir-system-quality-and-performance_fig9-15.png|Figure 2]] shows this relationship.

[[Category:Predicting the occurrence of oil and gas traps]]  

[[Category:Predicting the occurrence of oil and gas traps]]  

[[Category:Predicting reservoir system quality and performance]]

[[Category:Predicting reservoir system quality and performance]]