Difference between revisions of "Seal capacity: pitfalls and limitations of estimation"
Jump to navigation
Jump to search
FWhitehurst (talk | contribs) |
FWhitehurst (talk | contribs) |
||
Line 20: | Line 20: | ||
* [[Saturations required for hydrocarbon flow|Hydrocarbon saturations required for flow]] through top seals—and, consequently, displacement pressures—may be much higher than commonly assumed. | * [[Saturations required for hydrocarbon flow|Hydrocarbon saturations required for flow]] through top seals—and, consequently, displacement pressures—may be much higher than commonly assumed. | ||
* Hydrocarbon columns beneath breached seals and hydrocarbon-wet seals may not be related to the capillary properties of the seal in any easily understood way. | * Hydrocarbon columns beneath breached seals and hydrocarbon-wet seals may not be related to the capillary properties of the seal in any easily understood way. | ||
− | * Diffusion can cause loss of large volumes of gas but not oil through a top seal. | + | * [http://en.wikipedia.org/wiki/Diffusion Diffusion] can cause loss of large volumes of gas but not oil through a top seal. |
* Hydrodynamic flow can alter top seal capacity. | * Hydrodynamic flow can alter top seal capacity. | ||
Revision as of 18:07, 30 April 2014
Exploring for Oil and Gas Traps | |
Series | Treatise in Petroleum Geology |
---|---|
Part | Predicting the occurrence of oil and gas traps |
Chapter | Evaluating top and fault seal |
Author | Grant M. Skerlec |
Link | Web page |
Store | AAPG Store |
Although it is tantalizing to be able to measure the capillary properties of a seal and then assess hydrocarbon volumes, some practical problems exist:
- It is not easy to characterize the displacement pressure of a top seal from a few, or many, measurements.
- Few empirical field studies compare the predicted and observed hydrocarbon column heights. This is worrisome because idealized laboratory experiments have significant errors in the predicted hydrocarbon column heights.
- Hydrocarbon saturations required for flow through top seals—and, consequently, displacement pressures—may be much higher than commonly assumed.
- Hydrocarbon columns beneath breached seals and hydrocarbon-wet seals may not be related to the capillary properties of the seal in any easily understood way.
- Diffusion can cause loss of large volumes of gas but not oil through a top seal.
- Hydrodynamic flow can alter top seal capacity.
See also
- [[Difficulty of characterizing pd of a seal]]
- Does the theory predict reality?
- Saturations required for hydrocarbon flow
- Seal capacity of breached and hydrocarbon-wet seals
- Hydrodynamic flow and pressure transients
- Top seal displacement pressure
- Diffusive seal leakage