Quantitative biostratigraphy

From AAPG Wiki
Revision as of 16:32, 18 January 2014 by Matt (talk | contribs) (→‎See also: more specific)
Jump to navigation Jump to search
Exploring for Oil and Gas Traps
Series Treatise in Petroleum Geology
Part Predicting the occurrence of oil and gas traps
Chapter Applied paleontology
Author Robert L. Fleisher, H. Richard Lane
Link Web page
Store AAPG Store

Advances in statistical methods and computer technology provide paleontologists with a variety of techniques for collecting, managing, and evaluating large volumes of biostratigraphic data. Several quantitative methods have been developed to define an optimum sequence of biostratigraphic events, compositing data from many different stratigraphic sections to serve as a reference standard that will overcome inconsistencies that may be encountered in the fossil record at particular locales.

Graphic correlation[edit]

Graphic correlation.[1] is a widely accepted deterministic technique for ranking fossil occurrences according to the geological time represented in a set of reference sections. This approach has broad applications to solving biostratigraphic and sedimentologic problems (see [2]

The format for a graphic correlation is an x–y crosspiot on which biostratigraphic data (tops, bases, abundance/diversity events) recorded by measured stratigraphic position in one section (y-axis) may be matched to like occurrences in another section or a composite standard (x-axis; see Figure 17-27). Based on the array of data points, a preferred overall correlation can be defined by one or more line segments. Points falling on the line(s) of correlation are interpreted to be synchronous markers; those off the line(s), diachronous.

The illustration below shows a graphic correlation of two sections.

Figure 17-27 See text for explanation.

Composite standards[edit]

An optimum sequence can be derived by graphically correlating a series of sections and establishing a composite standard—a database of the maximum time-stratigraphic ranges for a particular area under study. A composite standard should provide a relatively complete biostratigraphic representation of geologic time. On graphic correlation plots, apparent hiatuses are defined and quantified in time (composite standard units) by horizontal terraces. Fossil ranges in a composite standard are subject to alteration with each new graphic correlation, making it a complex, evolving database that usually requires computerized data management and applications.

As applied to geologic interpretation, a composite standard (1) unifies biostratigraphic data into a high-resolution time correlation framework and (2) provides a quantitative basis for defining the time significance of faults, unconformities, and other sequence stratigraphic boundaries.

The figure below is a graphic correlation interpretation of well data (tops only).

Figure 17-28 See text for explanation.

Probabilistic correlations[edit]

The sequence of biostratigraphic events (i.e., highest and lowest occurrences) is frequently different, to a greater or lesser degree, between even nearby wells or outcrop sections. Probabilistic biostratigraphy is a statistical technique that determines the probability a sequence of biostratigraphic events will occur in a specific order. Probabilistic correlations, accordingly, are based on the sequence of events and not on the stratigraphic intervals or distances between them.

Probabilistic techniques can help us recognize objectively the most probable sequence of events and therefore can be used in (1) constructing interval zones and zonations and (2) evaluating the reliability of particular biostratigraphic events in local or regional settings.

Probabilistic methodology[edit]

The sequence of biostratigraphic events [i.e., highest occurrences, or last-appearance datums (LAD), and lowest occurrences, or first-appearance datums (FAD)] is determined for each section to be used in a study. The most complete is taken as a hypothetical most probable sequence and is statistically compared with all the other sequences in the study. The original hypothetical sequence is revised based on this analysis; the result is the most probable sequence of biostratigraphic events and an indication of their chronostratigraphic reliability. A high frequency of crossovers (mismatches) for a pair of species in the sections under study suggests the biostratigraphic events are closely spaced in relative time; few crossovers suggest a wider time spacing.

See also[edit]

References[edit]

  1. Shaw, A., B., 1964, Time in Stratigraphy: New York, McGraw-Hill, 365 p.
  2. Mann, K., O., Lane, H., R., eds., 1995, Graphic Correlation: SEPM (Society for Sedimentary Geology) Special Publication 53, 263 p.

External links[edit]

find literature about
Quantitative biostratigraphy
Datapages button.png GeoScienceWorld button.png OnePetro button.png Google button.png