Changes

Jump to navigation Jump to search
23 bytes removed ,  17:47, 13 September 2013
Line 132: Line 132:  
| Gas || 0.00073 to 0.50
 
| Gas || 0.00073 to 0.50
 
|-
 
|-
| Oil || 140° || 0.50 to 1.0
+
| Oil || 0.50 to 1.0
 
|-
 
|-
| Brine || 0° || 1.0 to 1.2
+
| Brine || 1.0 to 1.2
 
|}
 
|}
   Line 168: Line 168:  
It should be noted that although these more specialized procedures are quite informative, especially for approximating hydrocarbon recovery efficiencies, they are also relatively labor intensive and expensive when compared to routine mercury injection tests.
 
It should be noted that although these more specialized procedures are quite informative, especially for approximating hydrocarbon recovery efficiencies, they are also relatively labor intensive and expensive when compared to routine mercury injection tests.
   −
[[File:charles-l-vavra-john-g-kaldi-robert-m-sneider_capillary-pressure_5.jpg|thumb|{{figure_number|5}}Effect of capillary pressure (left) on water saturation (right). At any given height above the free water level, water saturations vary widely among rock types (A-E) due to diffferences in capillarity. For example, at 50 ft above free water level, water saturations vary from 18% (rock type A) to 95% (rock type E). A well drilled into an interbedded sequence of these rock types would show multiple oil-water contacts and a highly irregular vertical saturation profile. Note also the wide transition zone in rock type B caused by poor sorting of the pore throats.]]  
+
[[File:charles-l-vavra-john-g-kaldi-robert-m-sneider_capillary-pressure_5.jpg|thumb|{{figure_number|5}}Effect of capillary pressure (left) on water saturation (right). At any given height above the free water level, water saturations vary widely among rock types (A-E) due to diffferences in capillarity. For example, at 50 ft above free water level, water saturations vary from 18% (rock type A) to 95% (rock type E). A well drilled into an interbedded sequence of these rock types would show multiple oil-water contacts and a highly irregular vertical saturation profile. Note also the wide transition zone in rock type B caused by poor sorting of the pore throats.]]
    
==See also==
 
==See also==

Navigation menu