Changes

[[file:core-description_fig1.png|thumb|left|{{figure number|1}}Idealized graphic log. Explanation for some symbols used for sedimentary structures, lithologies, fossils, and contacts are given. Grain size of sillclclastic rocks and Dunham's)<ref name=pt05r50>Dunham, R. J., 1962, Classification of carbonate rocks according to depositional texture, in Ham, W. E., ed., Classification of Carbonate Rocks: AAPG Memoir 1, p. 108–121.</ref> classification of limestones are indicated in the column on the left. All sedimentary structures are depicted graphically as accurately as possible. Porosity amounts in percent can be scaled as needed. (Modified from <ref name=pt05r32>Casey, J. M., 1980, Depositional systems and basin evolution of the Late Paleozoic Taos trough, northern New Mexico: Ph. D. Dissertation, The University of Texas at Austin, 236 p.</ref><ref name=pt05r28 />.)]]

[[file:core-description_fig1.png|thumb|left|{{figure number|1}}Idealized graphic log. Explanation for some symbols used for sedimentary structures, lithologies, fossils, and contacts are given. Grain size of sillclclastic rocks and Dunham's)<ref name=pt05r50>Dunham, R. J., 1962, Classification of carbonate rocks according to depositional texture, in Ham, W. E., ed., Classification of Carbonate Rocks: AAPG Memoir 1, p. 108–121.</ref> classification of limestones are indicated in the column on the left. All sedimentary structures are depicted graphically as accurately as possible. Porosity amounts in percent can be scaled as needed. (Modified from <ref name=pt05r32>Casey, J. M., 1980, Depositional systems and basin evolution of the Late Paleozoic Taos trough, northern New Mexico: Ph. D. Dissertation, The University of Texas at Austin, 236 p.</ref><ref name=pt05r28 />.)]]

Recommended formats for graphic logging are given by Bebout and Loucks<ref name=pt05r24>Bebout, D. G., Loucks, R. G., 1984, Handbook for Logging Carbonate Rocks: The University of Texas at Austin, Bureau of Economic Geology Handbook 5, 43 p.</ref> and Boyles et al.<ref name=pt05r28>Boyles, J. M., Scott, A. J., Rine, J. M., 1986, A logging form for graphic descriptions of core and outcrop: Journal of Sedimentary Petrology, v. 56, p. 567–568., 10., 1306/212F89DB-2B24-11D7-8648000102C1865D</ref> A completed graphic log is shown in Figure 1. Grain size, sedimentary structures, and accessories are shown in the left column. Let's look at how each type of data is handled in the graphic log.

Recommended formats for graphic logging are given by Bebout and Loucks<ref name=pt05r24>Bebout, D. G., Loucks, R. G., 1984, Handbook for Logging Carbonate Rocks: The University of Texas at Austin, Bureau of Economic Geology Handbook 5, 43 p.</ref> and Boyles et al.<ref name=pt05r28>Boyles, J. M., Scott, A. J., Rine, J. M., 1986, A logging form for graphic descriptions of core and outcrop: Journal of Sedimentary Petrology, v. 56, p. 567–568., 10., 1306/212F89DB-2B24-11D7-8648000102C1865D</ref> A completed graphic log is shown in [[:file:core-description_fig1.png|Figure 1]]. Grain size, sedimentary structures, and accessories are shown in the left column. Let's look at how each type of data is handled in the graphic log.

===Grain size===

===Grain size===

===Lithology===

===Lithology===

Dominant lithologies and the nature of the contact between lithologic units are recorded in the “Rock Type and Contacts” column near the middle of a graphic log (Figure 1). Standardized symbols for illustrating lithologies are available and are presented by Tucker<ref name=pt05r157>Tucker, M. E., 1982, The Field Description of Sedimentary Rocks: United Kingdom, The Open University Press, 112 p.</ref> and Lindholm.<ref name=pt05r103 /> If more than one lithology or interbedded lithologies exist within an interval, lithologies should be logged by estimating the percent volume of each lithology and noting the terrigenous clastic lithologies to the left of the chemical rocks. Contacts between lithologies are recognized in core as gradational, interbedded, or sharp. Some sharp contacts are probably erosional and may represent unconformity surfaces. Additional information such as the presence of root structures and early diagenetic cements may aid in determining the true nature of sharp contacts.

Dominant lithologies and the nature of the contact between lithologic units are recorded in the “Rock Type and Contacts” column near the middle of a graphic log ([[:file:core-description_fig1.png|Figure 1]]). Standardized symbols for illustrating lithologies are available and are presented by Tucker<ref name=pt05r157>Tucker, M. E., 1982, The Field Description of Sedimentary Rocks: United Kingdom, The Open University Press, 112 p.</ref> and Lindholm.<ref name=pt05r103 /> If more than one lithology or interbedded lithologies exist within an interval, lithologies should be logged by estimating the percent volume of each lithology and noting the terrigenous clastic lithologies to the left of the chemical rocks. Contacts between lithologies are recognized in core as gradational, interbedded, or sharp. Some sharp contacts are probably erosional and may represent unconformity surfaces. Additional information such as the presence of root structures and early diagenetic cements may aid in determining the true nature of sharp contacts.

[[file:core-description_fig2.png|thumb|{{figure number|2}}(a) Comparison chart for sorting and sorting classes. (Modified from <ref name=pt05r125>Pettijohn, F. J., Porter, P. E., Siever, R., 1987, Sand and Sandstone, 2nd. ed.: New York, Springer-Verlag, 553 p.</ref>.) (b) Comparison chart for roundness and sphericity. (Modified from <ref name=pt05r130>Powers, M. C., 1953, A new roundness scale for sedimentary particles: Journal Sedimentary Petrology, v. 23, p. 117–119.</ref>.)]]

[[file:core-description_fig2.png|thumb|{{figure number|2}}(a) Comparison chart for sorting and sorting classes. (Modified from <ref name=pt05r125>Pettijohn, F. J., Porter, P. E., Siever, R., 1987, Sand and Sandstone, 2nd. ed.: New York, Springer-Verlag, 553 p.</ref>.) (b) Comparison chart for roundness and sphericity. (Modified from <ref name=pt05r130>Powers, M. C., 1953, A new roundness scale for sedimentary particles: Journal Sedimentary Petrology, v. 23, p. 117–119.</ref>.)]]