Difference between revisions of "Meandering fluvial reservoirs"

From AAPG Wiki
Jump to navigation Jump to search
Line 22: Line 22:
  
 
Meander belt reservoirs show different production behavior characteristics from braided river reservoirs; in the absence of seismic geomorphology evidence, the production geologist should intuitively pick the fluvial geometry type most likely to fit the available data and the reservoir performance. Perhaps because of the uncertainty involved in determining the planform geometry in fluvial reservoirs, the scenario approach (see [[Reservoir uncertainty]]) may be an appropriate tool to help evaluate fluvial reservoirs.
 
Meander belt reservoirs show different production behavior characteristics from braided river reservoirs; in the absence of seismic geomorphology evidence, the production geologist should intuitively pick the fluvial geometry type most likely to fit the available data and the reservoir performance. Perhaps because of the uncertainty involved in determining the planform geometry in fluvial reservoirs, the scenario approach (see [[Reservoir uncertainty]]) may be an appropriate tool to help evaluate fluvial reservoirs.
 +
 +
[[file:M91FG173.JPG|thumb|300px|{{figure number|2}}Satellite photo of a fluvial meander belt, United States. Courtesy of the [http://www.earthasart.gsfc.nasa.gov NASA Web site]. The lower diagram shows the internal geometry of the present-day Mississippi meander belt (from Jordan and Pryor<ref name=Jordanandpryor_1992> Jordan, D. W., and W. A. Pryor, 1992, [http://archives.datapages.com/data/bulletns/1992-93/data/pg/0076/0010/0000/1601.htm Hierarchical levels of heterogeneity in a Mississippi river meander belt and application to reservoir systems]: AAPG Bulletin, v. 76, no. 10, p. 1601–1624.</ref>). Reprinted with permission from the AAPG.]]
 +
 +
[[file:M91FG174.JPG|thumb|300px|{{figure number|3}}Computer simulation of a meander belt geometry from Sun et al.<ref name=Sunetal_1996>Sun, T., P. Meakin, T. Jossang, and K. Schwarz, 1996, A simulation model of meandering rivers: Water Resources Research, v. 32, pt. 9, p. 2937–2954.</ref> The meander belt comprises a complex labyrinth of point bars and clay plugs. The meander belt width is on the scale of a few hundreds of meters. Reprinted with permission from, and &copy; by, the American Geophysical Union.]]
 +
 +
==Geometry of meander belts==
 +
Meandering rivers deposit sand and mud within well-defined meander belts. The appearance of a meander belt in plan and cross section is of a complex labyrinth of interlocking sand bodies on the scale of hundreds of meters, embedded within varying volumes of mud ([[:file:M91FG173.JPG|Figure 2]]). The mud can make up 50% or more of the volume. Channel features, where they survive, tend to be plugged with clay ([[:file:M91FG173.JPG|Figure 2]], [[:file:M91FG174.JPG|Figure 3]]).
  
  

Revision as of 16:13, 31 July 2015

This page is under construction

Oil Field Production Geology
Series Memoirs
Part The Production Geologist and the Reservoir
Chapter Eolian reservoirs
Author Mike Shepherd
Link Web page
PDF PDF file (requires access)
Store AAPG Store

Fluvial reservoirs are difficult for the production geologist to understand, characterize, and model. One major problem involves trying to classify fluvial reservoirs in the subsurface. The system used in this book broadly categorizes fluvial systems into meandering and braided fluvial reservoirs. Although this is a classification used by many production geologists, not all experts are happy with this approach; some believe the classification to be too prescriptive. They consider that only limited inferences can be made from core and log data as to the overall geometry of a fluvial reservoir in the subsurface (e.g., Bridge[1]). Because of this, some geologists prefer to use a simple nongeneric description by classifying subsurface fluvial geometries as either sheets or ribbons.[2]

Figure 1 A point bar cut into the underlying Ivan limestone as picked out by varying seismic amplitudes on a horizon display, late Pennsylvanian to Early Permian, Baylor County, Texas (from Burnett[3]). Reprinted with permission from the AAPG.

Despite the above difficulties, the production geologist will nevertheless try and find some basis for providing a predictive model for the subsurface geology of a fluvial reservoir. Seismic data can help to determine the planform geometry where it is of sufficient resolution (Figure 1). Fluvial geometries can sometimes be well differentiated on horizon slice amplitude displays (e.g., Brown et al.,[4] Rijks and Jauffred,[5] Noah et al.,[6] Carter[7]).

Meander belt reservoirs show different production behavior characteristics from braided river reservoirs; in the absence of seismic geomorphology evidence, the production geologist should intuitively pick the fluvial geometry type most likely to fit the available data and the reservoir performance. Perhaps because of the uncertainty involved in determining the planform geometry in fluvial reservoirs, the scenario approach (see Reservoir uncertainty) may be an appropriate tool to help evaluate fluvial reservoirs.

Figure 2 Satellite photo of a fluvial meander belt, United States. Courtesy of the NASA Web site. The lower diagram shows the internal geometry of the present-day Mississippi meander belt (from Jordan and Pryor[8]). Reprinted with permission from the AAPG.
Figure 3 Computer simulation of a meander belt geometry from Sun et al.[9] The meander belt comprises a complex labyrinth of point bars and clay plugs. The meander belt width is on the scale of a few hundreds of meters. Reprinted with permission from, and © by, the American Geophysical Union.

Geometry of meander belts

Meandering rivers deposit sand and mud within well-defined meander belts. The appearance of a meander belt in plan and cross section is of a complex labyrinth of interlocking sand bodies on the scale of hundreds of meters, embedded within varying volumes of mud (Figure 2). The mud can make up 50% or more of the volume. Channel features, where they survive, tend to be plugged with clay (Figure 2, Figure 3).



See also

References

  1. Bridge, J. S., 2003, Rivers and flood plains: Forms, processes and sedimentary record: Oxford, Blackwell, 491 p.
  2. Friend, P. F., M. J. Slater, and R. C. Williams, 1979, Vertical and lateral building of river sandstone bodies, Ebro Basin, Spain: Journal of the Geological Society of London, v. 136, p. 39–46.
  3. Burnett, M., 1996, 3-D seismic expression of a shallow fluvial system in west central Texas, in P. Weimer and T. L. Davis, eds.: AAPG Studies in Geology 42 and SEG (Society of Exploration Geophysicists) Geophysical Developments Series 5, p. 45–56.
  4. Brown, A. R., C. G. Dahm, and R. J. Graebner, 1981, A stratigraphic case history using three-dimensional seismic data in the Gulf of Thailand: Geophysical Prospecting, v. 29, no. 3, p. 327–349.
  5. Rijks, E. J. K., and J. C. E. M. Jauffred, 1991, Attribute extraction: An important application in any detailed 3D interpretation study: Leading Edge, v. 10, no. 9, p. 11–19.
  6. Noah, J. T., G. S. Hofland, and K. Lemke, 1992, Seismic interpretation of meander channel point-bar deposits using realistic seismic modeling techniques: The Leading Edge, v. 11, p. 13–18.
  7. Carter, D. C., 2003, 3-D seismic geomorphology: Insights into fluvial reservoir deposition and performance, Widuri field, Java Sea: AAPG Bulletin, v. 87, no. 6, p. 909–934.
  8. Jordan, D. W., and W. A. Pryor, 1992, Hierarchical levels of heterogeneity in a Mississippi river meander belt and application to reservoir systems: AAPG Bulletin, v. 76, no. 10, p. 1601–1624.
  9. Sun, T., P. Meakin, T. Jossang, and K. Schwarz, 1996, A simulation model of meandering rivers: Water Resources Research, v. 32, pt. 9, p. 2937–2954.

External links

find literature about
Meandering fluvial reservoirs
Datapages button.png GeoScienceWorld button.png OnePetro button.png Google button.png