Changes

===Common midpoint (CMP) stack===

===Common midpoint (CMP) stack===

This is the single most effective step for noise reduction in the processing flow. The shooting procedure results in many traces being acquired with the point midway between [[source]] and [[receiver]] (called the midpoint) being coincident on the earths surface. The only difference between the traces is the distance between source and receiver (offset). Once these traces have been NMO (and DMO) corrected, they are really redundant samples of the same reflection. Adding them together increases the signal to random noise ratio by the square root of the number of redundant samples. The process reduces the field data to a stacked section consisting of one trace for each midpoint location, assumed to have been recorded with a shot and receiver coincident at the midpoint location (see [[:file:basic-seismic-processing_fig2.png|Figure 2]]).

This is the single most effective step for noise reduction in the processing flow. The shooting procedure results in many traces being acquired with the point midway between [[source]] and [[receiver]] (called the midpoint) being coincident on the earths surface. The only difference between the traces is the distance between source and receiver ([[offset]]). Once these traces have been NMO (and DMO) corrected, they are really redundant samples of the same reflection. Adding them together increases the signal to random noise ratio by the square root of the number of redundant samples. The process reduces the field data to a stacked section consisting of one trace for each midpoint location, assumed to have been recorded with a shot and receiver coincident at the midpoint location (see [[:file:basic-seismic-processing_fig2.png|Figure 2]]).

===Poststack filter===

===Poststack filter===