Search results

...ing-geological-data-with-a-computer_fig2.png|{{figure number|2}}Triangular mesh prepared from Davis'<ref name=pt08r6>Davis, J. C., 1973, Statistics and dat ...ical-data-with-a-computer_fig3.png|{{figure number|3}}Contoured triangular mesh of Figure 2.

...ravity of the two liquids. Many times, a mist extractor composed of vanes, mesh pads, or a cyclonic passage is used to remove residual liquid droplets from

...returning mud travels across the screens, the mud fluid falls through the mesh, while solids travel to the end of the screen. A board or catching box is p

...ant under the most severe producing condition will be 4000 psi. If a 20/40 mesh Ottawa sand is used during the treatment, the permeability of this sand wil ...ious example would need to be used. However, even the best available 20/40 mesh proppants have a permeability only about four times greater than sand at th

...ools required for effective computer mapping. Whether a grid, triangulated mesh, or other surface model is used, most of these tools are needed. Where appr

...e kH and were completed with modest sand fracture stimulations using 20/40 mesh sand proppant, pumped at relatively low, 40–50 barrels of fluid per minut ...r minute, which was the standard at the time) and finer mesh proppant (100 mesh vs. 20/40). The idea was to rubblize the rock near wellbore not to create a

...es 105 kg (48,000–400,000 lb) of 841/420 mum (20/40 mesh) and 149 mum (100 mesh) sand (scout ticket). The Mowry Shale is at about 2621.28 m (8600 ft) in th