− | [[Well completion|Completion]]s can be divided into three categories: open hole completions, liner completions, and [[perforations|perforated]] casing completions. In most wells, conventional single perforated casing completions are used; however, multiple, alternate, or slim hole completions may be used under certain conditions. The choice of completion type should be closely coordinated with the development of the reservoir management plan. For example, the size, weight, and grade of the tubular goods will be determined based upon the ultimate use of a wellbore. An [[injection well]] may require stronger casing than a [[production well]]. | + | [[Well completion|Completion]]s can be divided into three categories: open hole completions, liner completions, and [[perforations|perforated]] casing completions. In most wells, conventional single perforated casing completions are used; however, multiple, alternate, or slim hole completions may be used under certain conditions. The choice of completion type should be closely coordinated with the development of the reservoir management plan. For example, the size, weight, and grade of the tubular goods will be determined based upon the ultimate use of a wellbore. An [[Waterflooding|injection well]] may require stronger casing than a [[production well]]. |