Changes

Jump to navigation Jump to search
no edit summary
Line 1: Line 1: −
[[file:GeoWikiLogo.jpg|300px]]
+
{{GeoWiki Write Off
 +
|image=GeoWikiLogo.jpg
 +
|Author=Alfian Gilang Gumelar
 +
|Affiliation=BitCan Geoscience & Engineering Inc.
 +
|Competition=[[2021 Middle East Wiki Write Off]]
 +
}}
   −
An Entry from the AAPG [[2021 Middle East Wiki Write Off]]!
  −
  −
by Alfian Gilang Gumelar, BitCan Geoscience & Engineering Inc.
  −
  −
==Introduction==
   
Fault seal analysis is used to determine the level of connectivity of a separate reservoir due to fault segments. This is controlled by the permeability and porosity parameters of rocks that are in the fault section. Fault segment that becomes insulating if it has high porosity and permeability values will channel hydrocarbon fluid to the surface. So that the fault is one of the traps that are good for hydrocarbons. There is a mechanism where a fault can be a seal of fluid <ref name=Watts_1987>Watts, N. 1987. Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns: Marine and Petroleum Geology, v. 4, p. 274–307.</ref> <ref name=Knipe_1992>Knipe, R. J., 1992. Faulting processes and fault seal: Structural and tectonic modelling and its application to petroleum geology, Elsevier p. 325-342.</ref>:
 
Fault seal analysis is used to determine the level of connectivity of a separate reservoir due to fault segments. This is controlled by the permeability and porosity parameters of rocks that are in the fault section. Fault segment that becomes insulating if it has high porosity and permeability values will channel hydrocarbon fluid to the surface. So that the fault is one of the traps that are good for hydrocarbons. There is a mechanism where a fault can be a seal of fluid <ref name=Watts_1987>Watts, N. 1987. Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns: Marine and Petroleum Geology, v. 4, p. 274–307.</ref> <ref name=Knipe_1992>Knipe, R. J., 1992. Faulting processes and fault seal: Structural and tectonic modelling and its application to petroleum geology, Elsevier p. 325-342.</ref>:
  

Navigation menu