Difference between revisions of "Seismic facies analysis"
FWhitehurst (talk | contribs) |
Cwhitehurst (talk | contribs) |
||
Line 66: | Line 66: | ||
The table below outlines a procedure to analyze seismic facies from a grid of sections (vertical) of 2-D or 3-D [[seismic data]] (modified from <ref name=ch21r31 />). | The table below outlines a procedure to analyze seismic facies from a grid of sections (vertical) of 2-D or 3-D [[seismic data]] (modified from <ref name=ch21r31 />). | ||
− | + | # Divide each [[Depositional sequence identification|depositional sequence]] into seismic facies units on all seismic sections. | |
− | + | # Describe the internal [[Reflection configuration patterns|reflection configuration]] and terminations of each seismic facies unit, i.e., sigmoid, parallel, [http://www.glossary.oilfield.slb.com/en/Terms/d/downlap.aspx downlap]. | |
− | + | # Transfer seismic facies descriptions from seismic sections to a shot point map of each sequence. | |
− | + | # Combine seismic facies distribution and thickness with the map distribution of any other diagnostic parameters, such as [http://wiki.seg.org/wiki/Dictionary:Interval_velocity interval velocity] or localized [http://wiki.seg.org/wiki/Dictionary:Amplitude_anomaly amplitude anomalies]. | |
− | + | # Integrate well and outcrop data with seismic facies distribution. | |
− | + | # Interpret the seismic facies maps in terms of depositional settings such as marine or nonmarine, water depth, basin position, energy, transport direction, or any other depositional aspects. | |
− | + | # Estimate lithology using depositional setting interpretation from step 6 and all available data. | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
==See also== | ==See also== |
Revision as of 20:45, 12 November 2014
Exploring for Oil and Gas Traps | |
Series | Treatise in Petroleum Geology |
---|---|
Part | Predicting the occurrence of oil and gas traps |
Chapter | Exploring for stratigraphic traps |
Author | John C. Dolson, Mike S. Bahorich, Rick C. Tobin, Edward A. Beaumont, Louis J. Terlikoski, Michael L. Hendricks |
Link | Web page |
Store | AAPG Store |
Seismic facies are "mappable, three dimensional seismic units composed of groups of reflections whose parameters differ from those of adjacent facies units”.[1] Seismic facies analysis is the description and interpretation of seismic reflection parameters, such as configuration, continuity, amplitude, and frequency, within the stratigraphic framework of a depositional sequence. Its purpose is to determine all variations of seismic parameters within third-order sequences and their systems tracts in order to determine lateral lithofacies and fluid type changes.[2]
Reflection parameters
There are five useful reflection parameters:
- Configuration (reflection geometry)
- Continuity
- Amplitude
- Frequency
- Interval velocity
Depositional environment, sediment source, and lithofacies can be interpreted by grouping these parameters into mappable, three-dimensional seismic facies.[4] The table below[1] summarizes the information obtained from each parameter.
Reflection parameter | Geologic interpretation |
---|---|
Configuration |
|
Continuity |
|
Amplitude |
|
Frequency |
|
Interval velocity |
|
Seismic facies analysis procedure
The table below outlines a procedure to analyze seismic facies from a grid of sections (vertical) of 2-D or 3-D seismic data (modified from [1]).
- Divide each depositional sequence into seismic facies units on all seismic sections.
- Describe the internal reflection configuration and terminations of each seismic facies unit, i.e., sigmoid, parallel, downlap.
- Transfer seismic facies descriptions from seismic sections to a shot point map of each sequence.
- Combine seismic facies distribution and thickness with the map distribution of any other diagnostic parameters, such as interval velocity or localized amplitude anomalies.
- Integrate well and outcrop data with seismic facies distribution.
- Interpret the seismic facies maps in terms of depositional settings such as marine or nonmarine, water depth, basin position, energy, transport direction, or any other depositional aspects.
- Estimate lithology using depositional setting interpretation from step 6 and all available data.
See also
- Seismic facies analysis
- Reflection configuration patterns
- Seismic facies mapping
- Analyzing individual reflectors
- Techniques for enhancing seismic facies analysis
- Analyzing lithofacies
- Petrophysical analysis of lithofacies
References
- ↑ 1.0 1.1 1.2 Mitchum, R., M., Vail, P., R., Sangree, J., B., 1977, Seismic stratigraphy and global changes in sea level, part 6: stratigraphic interpretations of seismic reflection patterns in depositional sequences, in Payton, C., E., ed., Seismic Stratigraphy and Applications to Hydrocarbon Exploration: AAPG Memoir 26, p. 117–133.
- ↑ Vail, P., R., 1987, Seismic stratigraphy interpretation procedure, in Bally, A., W., ed., Atlas of Seismic Stratigraphy: AAPG Studies in Geology No. 27, p. 2.
- ↑ Zeng, Hongliu, 2013, Frequency-dependent seismic-stratigraphic and facies interpretation: AAPG Bulletin, v. 97, no. 2, p. 201–221, DOI:10.1306/06011212029.
- ↑ Bally, A., W., ed., 1987, Atlas of Seismic Stratigraphy: AAPG Studies in Geology 27, vol. 1, 124 p.