Difference between revisions of "Hydrocarbon pressure gradient: plotting"

From AAPG Wiki
Jump to navigation Jump to search
Line 6: Line 6:
 
  | part    = Critical elements of the petroleum system
 
  | part    = Critical elements of the petroleum system
 
  | chapter = Formation fluid pressure and its application
 
  | chapter = Formation fluid pressure and its application
  | frompg  = 5-1
+
  | frompg  = 5-26
  | topg    = 5-64
+
  | topg    = 5-26
 
  | author  = Edward A. Beaumont, Forrest Fiedler
 
  | author  = Edward A. Beaumont, Forrest Fiedler
 
  | link    = http://archives.datapages.com/data/specpubs/beaumont/ch05/ch05.htm
 
  | link    = http://archives.datapages.com/data/specpubs/beaumont/ch05/ch05.htm

Revision as of 14:41, 13 February 2015

Exploring for Oil and Gas Traps
Series Treatise in Petroleum Geology
Part Critical elements of the petroleum system
Chapter Formation fluid pressure and its application
Author Edward A. Beaumont, Forrest Fiedler
Link Web page
Store AAPG Store

We can estimate the downdip free-water level from a valid fluid pressure measured within a reservoir.

Plotting gradient

The list below outlines the procedure for plotting a hydrocarbon pressure gradient on a hydrostatic pressure plot when a measured pressure is available from the reservoir.

  1. Plot measured fluid pressure on a hydrostatic pressure–depth plot.
  2. Determine the hydrocarbon pressure gradient from one of two ways:
    • Measured hydrocarbon density
    • Estimates of hydrocarbon density
  3. Determine the buoyancy pressure gradient: static water pressure gradient minus hydrocarbon pressure gradient.
  4. Determine a pressure above or below the measured depth point. The table below lists the steps for determining this number.
    1. Pick a depth above or below the measured point.
    2. Multiply the difference in depth by the buoyancy pressure gradient.
    3. Add the number from step 2 to the measured pressure if the depth is deeper; subtract if shallower.
  5. Plot the pressure number from step 4 on the pressure–depth plot and draw a line between this point and the measured pressure point. This line is the hydrocarbon pressure gradient.

See also

External links

find literature about
Hydrocarbon pressure gradient: plotting
Datapages button.png GeoScienceWorld button.png OnePetro button.png Google button.png