Difference between revisions of "Natural hydraulic fracturing example, North Sea"
Jump to navigation
Jump to search
FWhitehurst (talk | contribs) |
FWhitehurst (talk | contribs) |
||
Line 24: | Line 24: | ||
Evidence for hydraulic fracturing and seal rupture include the following: | Evidence for hydraulic fracturing and seal rupture include the following: | ||
− | * A fossil oil—water contact exists at the synclinal spill point of the trap. The trap was once filled with hydrocarbon, but something happened after trap fill to bleed off hydrocarbons. | + | * A fossil [[oil—water contact]] exists at the [[Syncline|synclinal]] [[spill point]] of the trap. The trap was once filled with [[hydrocarbon]], but something happened after trap fill to bleed off hydrocarbons. |
− | * Hydrocarbon shows exist throughout the sediment column above the reservoir. These hydrocarbons are direct evidence of a breached top seal. | + | * Hydrocarbon [[Show evaluation|shows]] exist throughout the sediment column above the [[reservoir]]. These hydrocarbons are direct evidence of a breached top seal. |
− | * The pore pressure is close to the theoretical fracture pressure. In adjacent fields, the pore pressure is significantly less than P<sub>f</sub>. | + | * The [[pore pressure]] is close to the theoretical [[fracture pressure]], P<sub>f</sub>. In adjacent fields, the pore pressure is significantly less than P<sub>f</sub>. |
− | * Cores show vertical, open extension | + | * Cores show vertical, open [[extension fracture]]s rather than the more common [[shear fracture]]s found in adjacent fields. These fractures are identical to fractures produced by hydraulic fracturing. |
− | [[:file:evaluating-top-and-fault-seal_fig10-44.png|Figure 1]] shows that the pore pressure is close to the fracture pressure at the base of the top seal (approximately [[depth::1300 ft]]). The pore pressure is inferred from mud weight and RFT measurements (solid dots). Leak-off | + | [[:file:evaluating-top-and-fault-seal_fig10-44.png|Figure 1]] shows that the pore pressure is close to the fracture pressure at the base of the top seal (approximately [[depth::1300 ft]]). The pore pressure is inferred from mud weight and [[Wireline formation testers|repeat formation tester]] (RFT) measurements (solid dots). [[Leak-off test]]s (LOT) help constrain the fracture pressure. The fracture pressure is close to the [[lithostatic pressure]] or overburden pressure. |
==See also== | ==See also== |
Revision as of 20:37, 23 May 2014
Exploring for Oil and Gas Traps | |
Series | Treatise in Petroleum Geology |
---|---|
Part | Predicting the occurrence of oil and gas traps |
Chapter | Evaluating top and fault seal |
Author | Grant M. Skerlec |
Link | Web page |
Store | AAPG Store |
Trap description
A trap in the Central graben, North Sea, appears to have been bled dry by natural hydraulic fracturing. This trap is a low-relief salt structure with a dry hole and has less-than-sufficient strain to fracture the top seal.
Evidence
Evidence for hydraulic fracturing and seal rupture include the following:
- A fossil oil—water contact exists at the synclinal spill point of the trap. The trap was once filled with hydrocarbon, but something happened after trap fill to bleed off hydrocarbons.
- Hydrocarbon shows exist throughout the sediment column above the reservoir. These hydrocarbons are direct evidence of a breached top seal.
- The pore pressure is close to the theoretical fracture pressure, Pf. In adjacent fields, the pore pressure is significantly less than Pf.
- Cores show vertical, open extension fractures rather than the more common shear fractures found in adjacent fields. These fractures are identical to fractures produced by hydraulic fracturing.
Figure 1 shows that the pore pressure is close to the fracture pressure at the base of the top seal (approximately depth::1300 ft). The pore pressure is inferred from mud weight and repeat formation tester (RFT) measurements (solid dots). Leak-off tests (LOT) help constrain the fracture pressure. The fracture pressure is close to the lithostatic pressure or overburden pressure.
See also
- Natural hydraulic fracturing of top seals
- Fracture threshold in the real world
- Overpressure and hydrocarbon distribution, gulf coast