Difference between revisions of "Free water level determination using pressure"
Cwhitehurst (talk | contribs) |
Cwhitehurst (talk | contribs) |
||
Line 6: | Line 6: | ||
| part = Critical elements of the petroleum system | | part = Critical elements of the petroleum system | ||
| chapter = Formation fluid pressure and its application | | chapter = Formation fluid pressure and its application | ||
− | | frompg = 5- | + | | frompg = 5-27 |
− | | topg = 5- | + | | topg = 5-28 |
| author = Edward A. Beaumont, Forrest Fiedler | | author = Edward A. Beaumont, Forrest Fiedler | ||
| link = http://archives.datapages.com/data/specpubs/beaumont/ch05/ch05.htm | | link = http://archives.datapages.com/data/specpubs/beaumont/ch05/ch05.htm |
Revision as of 17:22, 11 February 2015
Exploring for Oil and Gas Traps | |
![]() | |
Series | Treatise in Petroleum Geology |
---|---|
Part | Critical elements of the petroleum system |
Chapter | Formation fluid pressure and its application |
Author | Edward A. Beaumont, Forrest Fiedler |
Link | Web page |
Store | AAPG Store |
The free water level occurs where buoyancy pressure is zero in the reservoir-aquifer system. It defines the downdip limits of an accumulation. Pressure data reliability affects the resolution; however, resolution improves when it is supplemented with other petrophysical information.
Procedure: using repeat formation tester (RFT) data[edit]
An easy method for determining free water level (FWL) is projecting RFT pressure data downward from a reservoir to the aquifer. Figure 1 illustrates the procedure.
Procedure using a single measurement[edit]
The list below outlines the procedure for determining the free water level using a single pressure buildup point in the reservoir.
- Determine buoyancy pressure (Pb ) at the depth of the measured pressure (Pm ) from the measured pressure:
- Determine buoyancy pressure gradient (Pbg ):
- Calculate downdip length of hydrocarbon column (h):
As an example, let's determine the downdip length of a 30°API oil column with the following givens:
- Pm = pressure::3555 psi at depth::7611 ft
- Phydrostatic = 3525 psi
- Phydrostatic pressure gradient = 0.465 psi/ft
- Phydrocarbon pressure gradient = 0.38 psi/ft
Answer (tied back to steps above):
Therefore, the free water level is at depth::8167 ft.
See also[edit]
- Static hydrocarbon pressure gradients
- Estimating static oil pressure gradients
- Estimating static gas pressure gradients
- Plotting the hydrocarbon pressure gradient