Static oil pressure gradient estimation

The static oil pressure gradient is dependent on oil density. Subsurface density of oil or condensate depends on composition, amount of dissolved gases, temperature, and pressure. Oil or condensate density can be estimated to useful accuracy if stock tank API gravity and solution gas-oil ratio (GOR) are known.

Estimating oil pressure gradients

Follow the steps listed below to estimate static oil pressure gradient.

1. Estimate oil density using Figure 1.
2. Estimate oil pressure gradient using the following formula:

${\mbox{P}}_{\rm {oil\ grad}}=\rho _{\rm {oil}}\times 0.433{\mbox{ psi/ft}}$

where:

• P_{oil grad} = oil pressure gradient
• ρ_oil = oil density

Determining oil density

Figure 1 Determining oil density.

Use Figure 1 to determine oil density. If the GOR is unknown or if there is no dissolved gas in the oil, use the 0 line.

See also

• Static hydrocarbon pressure gradients
• Estimating static gas pressure gradients
• Plotting the hydrocarbon pressure gradient
• Free water level determination using pressure

External links

find literature about Static oil pressure gradient estimation

• Original content in Datapages
• Find the book in the AAPG Store

gas-oil ratio