Search results

• Strain analysis of top seals
  ...ured top seal with a relatively low fracture [[permeability]] of only 0.05 md, is more than 100 billion bbl/m.y.<ref name=ch10r71 /> Fracture permeabilit
  3 KB (403 words) - 15:21, 30 March 2022
• Basin-centered gas systems
  ! Type || Source rocks || Reservoir in-situ permeability (md) || [[Hydrocarbon migration]] distance || Reservoir pressure || Pressure me
  4 KB (469 words) - 19:01, 14 March 2016
• Vibro-sesismic to increasing the production rate of coal bed methane
  ...53.9% with average 36.6%. Kabs data before vibration is 231.46 m – 1113.59 mD and after vibration can reach 54.1% with average 39.4%. Sor Data before vib ! rowspan = 2 | || colspan = 4 | k (md) || colspan = 3 | Amplitude (mv)
  11 KB (1,551 words) - 16:49, 11 January 2016
• Marcellus Shale (Devonian) -- Appalachian Basin
  ...011), and exists at drilling depths of 2,000 to 9,000 feet measured depth (MD) (Zagorski and others, 2012; Wang and Carr, 2013). The organic-rich Marcell ...of the Marcellus Shale in western Maryland is zero to more than 8,000 feet MD (Brezinski, 2010, 2011). There is currently (2020) no production from the M
  19 KB (2,773 words) - 21:36, 4 March 2022
• Stimulation
  ...oir stimulation methods, while those having effective permeabilities of 10 md or greater generally require damage removal methods. Those formations in be ...permeabilities often in the microdarcy range (1 μD, or microdarcy, = 0.001 mD). If economic completions are to be developed from such formations, hydraul
  24 KB (3,633 words) - 13:55, 24 January 2022
• Tight gas reservoirs: evaluation
  Gas reservoirs with estimated ''in situ'' gas permeabilities of 0.1 md (millidarcy) or less are officially recognized by the U.S. Federal Energy R ...and expected. While the average air permeability values rarely exceed 1.0 md (millidarcy) for tight gas reservoirs, a significant difference in permeabi
  11 KB (1,444 words) - 21:26, 4 January 2024
• Coal bed methane (UDip)
  ...ter) and gas. Permeability values obtained from the test is equal to 40.43 mD. Permeability value shows that a flow of 40.43 milli cc, fluid (gas), moves ...be seen from the value of 24.8% porosity and permeability values of 40.43 mD. A small value of permeability indicates that it comes from the secondary p
  10 KB (1,576 words) - 14:42, 2 April 2019
• Stratigraphic trap seals
  ...ia:Mesoporous material|mesoporous]] sandstone with 18% [[porosity]] and 10 md [[permeability]], then the bottom [[length::75 ft]] (20 m) of the trap will
  5 KB (632 words) - 20:26, 3 February 2022
• Weyburn seal capacity
  * Ka = air permeability, md ...oductive area have porosities of about 10% and permeabilities of about 0.1 md (or less), based on routine core analyses from the 1960s. Unfortunately, th
  10 KB (1,484 words) - 20:55, 4 December 2023
• Reservoir
  ...ressure of 10-4atm m-2. Permeability in reservoir rocks may range from 0.1 mD to more than 10 D.<ref name=gluyas2004 /> ...remely high because of the dissolution, but permeability is not far from 5 mD. It is called clastic because oolite associated with limestone is present t
  14 KB (2,134 words) - 16:48, 26 March 2019
• Permeability
  ...unit for permeability is the Darcy (d) or, more commonly, the millidarcy (md). Relative permeability is a dimensionless ratio that reflects the capabili ...meability is typically expressed are the ''darcy'' (d) and ''millidarcy'' (md). A permeability of 1 d allows the flow of 1 cm³ per second of f
  19 KB (2,716 words) - 19:02, 20 January 2022
• User:Febriany/Sandbox
  ...ressure of 10-4atm m-2. Permeability in reservoir rocks may range from 0.1 mD to more than 10 D.<ref name=gluyas2004 />
  12 KB (1,741 words) - 23:03, 30 June 2015
• Morrow lithofacies and pore types: Sorrento field
  ...(K_a) are as great as 1-2 darcies but more commonly are 200-500 md.
  6 KB (769 words) - 17:23, 11 April 2022
• User:Rizqi Fadlilah/Sandbox
  ...ressure of 10-4atm m-2. Permeability in reservoir rocks may range from 0.1 mD to more than 10 D.<ref name=gluyas2004 />
  12 KB (1,822 words) - 02:27, 1 July 2015
• Overview of routine core analysis
  ...nventional core analysis. Sidewall cores from formations with more than 20 md permeability consistently have a measured permeability that is lower than t Low permeability, hard formations (''k'' k > 20 md), friable, or unconsolidated sandstones are usually reduced by 60% or more
  14 KB (2,121 words) - 21:16, 19 January 2022
• Production testing
  * ''k'' = permeability (md) To solve for permeability, an arbitrary value of permeability is assumed (0.1 md is often a good first estimate), and Equation 2 is solved for ''r''<sub>d</
  14 KB (2,165 words) - 18:42, 20 January 2022
• Well planning
  * Anticipated total depth (TD) in measured depth (MD) and TVD (true vertical depth)
  6 KB (779 words) - 15:09, 24 January 2022
• Fluid flow fundamentals
  ...s of various metric, English, and oil field units. It uses the millidarcy (md) for permeability. Other dimensions and units in this system are as follows * ''k'' = permeability (md)
  20 KB (3,155 words) - 21:20, 19 January 2022
• Glossary
  ;MD:measured depth
  5 KB (840 words) - 13:51, 18 March 2019
• Wireline formation testers
  ...igure 5]] illustrate typical records for sandstones at 0.1, 1, 10, and 100 mD (millidarcys). While these figures are qualitative, quantitative techniques
  10 KB (1,446 words) - 17:42, 18 January 2022

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)